Vacuum cup holders
Vacuum cup holders
Vacuum pads - cups
Vacuum pad - cup holders
Vacuum measurement, control and adjustment instruments
Vacuum valves and solenoid valves
Vacuum fittings and hoses
Vacuum pumps and pumpsets
Vacuum generators and pneumatic pumpsets
Octopus vacuum gripping system
Term of sale
Instructions for searches
The new Vuototecnica catalogue has arrived!
Keep your eyes on the new Vuototecnica catalogue.
The future of vacuum technologies has arrived.
In the new 900-page catalogue you can find winning solutions for your industry, discover new products and see technical specifications.
New Vacupredator suction cups, ready to “bite”
Designed to facilitate robot integrators in one of the most difficult tasks in the field of handling in the packaging sector, they are perfect for picking up bags and flow packs, which are difficult to take by traditional rubber suction cups due to their flexibility.
New digital vacuum and pressure switches with two-colour display
These new devices with two-colour display are enclosed within a robust ABS container. They are carefully calibrated and at compensated temperature, ensuring high-precision measurement values.
Detected values are viewed on the main two-colour (red and green) display and programmable by...
Single-stage and multi-function vacuum generators, MSVE series
The vacuum generators of this new series can fully drive a negative pressure gripping system.
By means of coaxial shutters, the original compressed air supply system feeds large quantities of air to both the ejectors and the ejection system, thereby ensuring faster gripping and...
New digital vacuum switches
These new digital vacuum switches made with ABS body are really compact and extremely light to allow for its installation on board automatisms and near use.
These carefully calibrated devices are able to provide very accurate measurement values. The detected values are shown on the...
Flat and bellow elliptical suction cups with relative supports
Vuototecnica offers you a complete range of flat elliptical suction cups, normally used for gripping, handling and clamping cardboard cases and boxes, wood shingles, small ceramic or brick tiles, iron or stainless steel profiles, sheets and anything else present on long, narrow gripping...
The Vuototecnica Production Programme brochure is available in the
Bellow suction cups for flowpack packaging gripping
Created from experience, Vuototecnica welcomes the new increased performance bellows suction cups 01 30 45 S.
Especially suitable for installation on automatic, high production machines in the packaging sector, equipped with a grip lip designed to be extremely flexible, able to...
Two bellow suction cups for heavy-duty packaging
Vuototecnica has devised the all new two bellow suction cups for the handling of especially heavy cardboard boxes and packaging in the packaging sector.
These suction cups are able to compensate for the gripping height with a greater recovery of the unevenness of the load to be...
New rotary vane vacuum pumps, RVP series
Vuototecnica is proud to present a new range of rotary vane vacuum pumps, RVP.
It is an innovative product, which is technically complete in its standard equipment, built with the latest generation materials and at high standards of quality. It has a very high efficiency, and it is...
New solenoid valves for vacuums, for faster responses
A new, fully innovative series of solenoid valves for vacuums to guarantee exceptionally low response times have been created from Vuototecnica research and experience.
They are three-way vacuum solenoid valves, pilot-operated for capacities exceeding even 200 mc/h: They are used for...
Single-stage vacuum generators FVG 3 - 5 with ejector
• Specifically designed for high frequency grip/release applications
• Maximum supply pressure: 4 bar
• Available with the following capacities: 3 - 5 mc/h
• Maximum vacuum level: -85 KPa
• Excludable ejector
• Totally made of anodized aluminium
Cartridge vacuum generators PVR 1-4
• Can be directly integrated on suction gripping parts of the packaging machines
• Maximum output at low operating pressures (2 - 3 bar)
• Maximum vacuum level: -70 KPa
• Flow rates of 1 or 4 m3/h
• Their shape enables the suction of dust or small...
New FB28 suction filter with metal cartridge
The new FB28 suction filter with metal cartridge replaces the FB25 filter, no longer in production. Both attacks (G3/4 ") and capacity (40 cum/h) remain the same while size and weight are different (see the attached datasheet).
Preventing impurities from reaching the vacuum pump is...
Micro cup holders 20 80 05
• Extremely reduced size and weight
• Stainless steel stem and spring
• Self-lubricating bush built in the threaded sleeve ensuring a perfect sliding of the stem and durability
• Indicated for Pick & Place units and handling machines for unloading plastic objects from...
PVP SSX single-stage vacuum generators
• Available with 9, 14 and 18 cum/h
• 150 mbar abs. final pressure
• Standard stainless steel ejectors
• EPDM seal
• Fully made with anodised aluminium
• Equipped, as a standard, with the new SSX free-flow silencer high acoustic dampening reduction,...
Ball joint couplings with GSL axial vacuum connection
This series of couplings was designed to be installed on suckers with support, especially those that are flat or that have little lip, in order to allow them to easily adapt to the gripping surface of the load to be picked up, even if not perfectly parallel to the plane of the sucker itself or to...
New Vuototecnica brochures
New Vuototecnica brochures about the Production Programme and the Octopus Bars are available for download in this
Octopus gripping bars now even lighter!
Anthropomorphic robots and palletising systems manufacturers require increasingly flexible vacuum gripping systems.
Vuototecnica meets this requirement of extreme lightness with the new OCTOPUS gripping bars made of polizene, a plastic material that reduces the overall weight by...
When the vacuum generator is extremely compact
It’s the new PVP 05 single-stage vacuum generator. Its distinctive feature is the particularly reduced size compared to the performance it offers.
Vuototecnica has designed and created it for all applications requiring extremely compact equipment.
The new PVP 05...
A Leader in Vacuum Control
There are situations in which the use of an instrument able to provide an accurate signal once a certain vacuum level has been reached is recommended for safety purposes; such situations include the starting of a work cycle, or checking the grip of suction cups, etc.
Traditionally innovative: the new Bernoulli vacuum cups
Vuototecnica research has led to the creation of a new range of vacuum cups based on Bernoulli’s principle.
These new vacuum cups are ideal for handling, without any contact, fragile, uneven or microperforated objects, such as semiconductor platelets, silicon disks, solar cells, precious...
[high friction coefficient for a firm and secure grip]
Designed as an alternative to the more common cups used in the robot-automotive sector, they can offer excellent solutions to gripping and handling problems presented by the relative devices in all industry...
Tel. +39 039.53.20.561 or +39 039.53.20.106 - Fax +39 039.53.20.015 - E-mail
P.Iva/C.Fisc. 01367290135 -