consulentefidato.it

Vuototecnica Newsletter
Follow us on Twitter
let's meet on facebook
Keep in touch on Linkedin
Vacuumdaily.com
Vacuumdaily.net
YouTube Vuototecnica Channel
Oil-bath vacuum pumps mv 20 and mv 20a

Oil-bath vacuum pumps mv 20 and mv 20a

The single-stage oil-bath vane vacuum pumps of the MV series are activated by a standard electric motor coupled together via an elastic transmission joint. A centrifugal fan cantilevered-fitted onto the pump shaft guarantees the right airflow for cooling the pump unit (forced surface cooling). A large oil recovery tank with built-in microfiber de-oiling cartridges, located on the pump exhaust, serves as a silencer and as a fume collector. The oil contained in the system lubricates, cools and seals the rotating and the fixed parts of the pumps. The standard check valve on the suction inlet is integral part of the pumps. Upon request, a filter for trapping possible impurities can also be provided. Pumps included between the MV 20 and the MV 100 are set for the installation of a gas ballast valve (upon request) which allows for a high compatibility to water vapour. In the other pumps, starting from MV 160R up to MV 300R, the built-in gas ballast valve is a standard. The features described above associated with a strong and compact construction make the pumps of the MV series suitable for continuous and intense use.
Product codes: MV20 MV20A

top next
Oil-bath vacuum pumps mv 40 and mv 40a

Oil-bath vacuum pumps mv 40 and mv 40a

The single-stage oil-bath vane vacuum pumps of the MV series are activated by a standard electric motor coupled together via an elastic transmission joint. A centrifugal fan cantilevered-fitted onto the pump shaft guarantees the right airflow for cooling the pump unit (forced surface cooling). A large oil recovery tank with built-in microfiber de-oiling cartridges, located on the pump exhaust, serves as a silencer and as a fume collector. The oil contained in the system lubricates, cools and seals the rotating and the fixed parts of the pumps. The standard check valve on the suction inlet is integral part of the pumps. Upon request, a filter for trapping possible impurities can also be provided. Pumps included between the MV 20 and the MV 100 are set for the installation of a gas ballast valve (upon request) which allows for a high compatibility to water vapour. In the other pumps, starting from MV 160R up to MV 300R, the built-in gas ballast valve is a standard. The features described above associated with a strong and compact construction make the pumps of the MV series suitable for continuous and intense use.
Product codes: MV40 MV40A

top next
Oil-bath vacuum pumps mv 60 and mv 60a

Oil-bath vacuum pumps mv 60 and mv 60a

The single-stage oil-bath vane vacuum pumps of the MV series are activated by a standard electric motor coupled together via an elastic transmission joint. A centrifugal fan cantilevered-fitted onto the pump shaft guarantees the right airflow for cooling the pump unit (forced surface cooling). A large oil recovery tank with built-in microfiber de-oiling cartridges, located on the pump exhaust, serves as a silencer and as a fume collector. The oil contained in the system lubricates, cools and seals the rotating and the fixed parts of the pumps. The standard check valve on the suction inlet is integral part of the pumps. Upon request, a filter for trapping possible impurities can also be provided. Pumps included between the MV 20 and the MV 100 are set for the installation of a gas ballast valve (upon request) which allows for a high compatibility to water vapour. In the other pumps, starting from MV 160R up to MV 300R, the built-in gas ballast valve is a standard. The features described above associated with a strong and compact construction make the pumps of the MV series suitable for continuous and intense use.
Product codes: MV60 MV60A

top next
Oil-bath vacuum pumps mv 100 and mv 100a

Oil-bath vacuum pumps mv 100 and mv 100a

The single-stage oil-bath vane vacuum pumps of the MV series are activated by a standard electric motor coupled together via an elastic transmission joint. A centrifugal fan cantilevered-fitted onto the pump shaft guarantees the right airflow for cooling the pump unit (forced surface cooling). A large oil recovery tank with built-in microfiber de-oiling cartridges, located on the pump exhaust, serves as a silencer and as a fume collector. The oil contained in the system lubricates, cools and seals the rotating and the fixed parts of the pumps. The standard check valve on the suction inlet is integral part of the pumps. Upon request, a filter for trapping possible impurities can also be provided. Pumps included between the MV 20 and the MV 100 are set for the installation of a gas ballast valve (upon request) which allows for a high compatibility to water vapour. In the other pumps, starting from MV 160R up to MV 300R, the built-in gas ballast valve is a standard. The features described above associated with a strong and compact construction make the pumps of the MV series suitable for continuous and intense use.
Product codes: MV100 MV100A

top next
Oil-bath vacuum pumps mv 160r and mv 160ra

Oil-bath vacuum pumps mv 160r and mv 160ra

The single-stage oil-bath vane vacuum pumps of the MV series are activated by a standard electric motor coupled together via an elastic transmission joint. A centrifugal fan cantilevered-fitted onto the pump shaft guarantees the right airflow for cooling the pump unit (forced surface cooling). A large oil recovery tank with built-in microfiber de-oiling cartridges, located on the pump exhaust, serves as a silencer and as a fume collector. The oil contained in the system lubricates, cools and seals the rotating and the fixed parts of the pumps. The standard check valve on the suction inlet is integral part of the pumps. Upon request, a filter for trapping possible impurities can also be provided. Pumps included between the MV 20 and the MV 100 are set for the installation of a gas ballast valve (upon request) which allows for a high compatibility to water vapour. In the other pumps, starting from MV 160R up to MV 300R, the built-in gas ballast valve is a standard. The features described above associated with a strong and compact construction make the pumps of the MV series suitable for continuous and intense use.
Product codes: MV160R MV160RA

top next
Oil-bath vacuum pumps mv 200r and mv 200ra

Oil-bath vacuum pumps mv 200r and mv 200ra

The single-stage oil-bath vane vacuum pumps of the MV series are activated by a standard electric motor coupled together via an elastic transmission joint. A centrifugal fan cantilevered-fitted onto the pump shaft guarantees the right airflow for cooling the pump unit (forced surface cooling). A large oil recovery tank with built-in microfiber de-oiling cartridges, located on the pump exhaust, serves as a silencer and as a fume collector. The oil contained in the system lubricates, cools and seals the rotating and the fixed parts of the pumps. The standard check valve on the suction inlet is integral part of the pumps. Upon request, a filter for trapping possible impurities can also be provided. Pumps included between the MV 20 and the MV 100 are set for the installation of a gas ballast valve (upon request) which allows for a high compatibility to water vapour. In the other pumps, starting from MV 160R up to MV 300R, the built-in gas ballast valve is a standard. The features described above associated with a strong and compact construction make the pumps of the MV series suitable for continuous and intense use.
Product codes: MV200R MV200RA

top next
Oil-bath vacuum pumps mv 300r and mv 300ra

Oil-bath vacuum pumps mv 300r and mv 300ra

The single-stage oil-bath vane vacuum pumps of the MV series are activated by a standard electric motor coupled together via an elastic transmission joint. A centrifugal fan cantilevered-fitted onto the pump shaft guarantees the right airflow for cooling the pump unit (forced surface cooling). A large oil recovery tank with built-in microfiber de-oiling cartridges, located on the pump exhaust, serves as a silencer and as a fume collector. The oil contained in the system lubricates, cools and seals the rotating and the fixed parts of the pumps. The standard check valve on the suction inlet is integral part of the pumps. Upon request, a filter for trapping possible impurities can also be provided. Pumps included between the MV 20 and the MV 100 are set for the installation of a gas ballast valve (upon request) which allows for a high compatibility to water vapour. In the other pumps, starting from MV 160R up to MV 300R, the built-in gas ballast valve is a standard. The features described above associated with a strong and compact construction make the pumps of the MV series suitable for continuous and intense use.
Product codes: MV300R MV300RA

top next