Home
Contacts
Products
Vacuum cups
Vacuum cup holders
Vacuum control
Vacuum valves
Suction filters
Vacuum hoses
Vacuum pumps
Vacuum generators
Octopus System
Graphic Division
Special products
New products
CAD drawings
Press
Video
Glass
Wood
Marble
Ceramic
Metal
Packaging
Food
Automotive
Plastic
Pharma
Printing
Misc
Solutions
Vacuum cups
Vacuum cup holders
Vacuum control
Vacuum valves
Suction filters
Vacuum fittings
Vacuum pumps
Vacuum generators
Octopus System
Graphic Division
Special products
Applications
Downloads
News
Newsletter 2026
Newsletter 2025
Newsletter 2024
Newsletter 2023
Newsletter 2022
Newsletter 2021
Newsletter 2020
Newsletter 2019
Newsletter 2018
Newsletter 2017
Newsletter 2016
Newsletter 2015
Newsletter 2014
Newsletter 2013
Vacuum pads - cups
Vacuum pad - cup holders
Vacuum measurement, control and adjustment instruments
Vacuum valves and solenoid valves
Suction filters
Vacuum fittings and hoses
Vacuum pumps and pumpsets
Vacuum generators and pneumatic pumpsets
Octopus vacuum gripping system
Graphic Division
Special products
Term of sale
New product
Storage of vacuum cups and rubber parts
Search
Instructions for searches
News/Events
In-line, FCL, FPL and FIL filters
These small in-line filters retain impurities and very fine dust, interfering with the flow rate in a negligible manner.
Thanks to their reduced size, they can be directly installed onto vacuum piping, close to the utilities (vacuum cups, vacuum clamping systems, etc.) for a...
New bellows vacuum cup 01 05 09
Vuototecnica presents the new bellows vacuum cup code: 01 05 09
In its ½ bellows shape, it is widely used in the Pharma and Packaging sector for gripping e.g. ampoules, syringes, tablets, capsules, etc.
They are characterised by their flexibility and adaptability of...
Vacuum cups SV series (STAR VACUUM)
The SV series of vacuum cups (STAR VACUUM) has been developed for handling flat and flexible objects such as cardboard layering pads or thin metal sheets without deformation, by virtue of the rubber reinforcement sectors inside these vacuum cups, which characterise their star-shaped bearing...
In-line, FCL, FPL and FIL filters
These large in-line filters retain impurities and very fine dust, interfering with the flow rate in a negligible manner.
They are composed of a cylindrical transparent Plexiglass body closed by two anodised aluminium flanges kept in place by Seeger rings, where all the threaded male or...
Vacuum regolators
These devices control the level of vacuum, maintaining it constant at the pre-set value (secondary vacuum), regardless of the network’s flow rate and the fluctuations in vacuum level (primary vacuum).
They operate by membrane-piston and exploit the pressure differential between the...
Vacuum regulators with pneumatic adjustment
Vacuum regulators with pneumatic adjustment differ from the previous ones for the way they adjust the level of vacuum; in fact, instead of acting manually on the adjustment screw, it is necessary to act on the pneumatic cylinder compressed air supply: the higher the pressure, and the higher the...
Pneumatic coaxial shutter valves
The function of these solenoid valves is to intercept the compressed air supply to the vacuum generators. Interception through an original coaxial shutter allows the supply of large quantities of air, thus ensuring greater gripping speed of the vacuum cups.
They are composed of an...
VACUMANAGER VM series power supply unit
VACUMANAGER VM series units are integrated electro-pneumatic circuits designed to supply and manage single-stage and multi-stage vacuum generators.
VM units house the following in an anodised body/distributor machined from billet aluminium:
- 1 Digital vacuum switch with...
New series of 2-way and 3-way vacuum solenoid pilot valves with 1/8 "gas suction section
These direct-drive valves have been specially designed for vacuum and are normally closed. They are composed of an anodised aluminium body, where the connections and the passage mouths are located, and of an actuator which is activated by an electric coil. The solenoid pilot valve shutter in NBR...
News! Electrical equipment for vacuum tests ATC01
This device has been made mainly to test the air-tightness of compostable capsules, although it is possible to test any kind of material that can be placed inside equipment.
The principle of operation is based on the detection of capsule deformations, under the direct action of the...
Special PH and P2H suction plates for OCTOPUS systems
The special suction plates PH and P2H can be installed on OCTOPUS systems to replace the PX and P2X plates.
They are made of anodised aluminium sheets with holes equidistant from each other and coated with a special sponge rubber, microperforated at the holes in the aluminium sheet, in...
Switchgear equipped with touch screen operator panel
The new electrical equipment consists of a touch screen, which is a special electronic device that is the result of combining a screen and a digitizer that allow the user to interact with a graphical interface using their fingers or specific objects.
The touch screen operator panels...
New direct drive, high flow 2-way vacuum solenoid valves
These direct drive two-way, two-position vacuum solenoid valves in the new series feature a conical shutter servo-controlled by the vacuum.
They are normally closed, but they can be supplied normally open upon request.
They are composed of an anodised aluminium body where the...
Single-stage vacuum generators with ejector FVG 8 and FVG 12
Specifically designed for very high frequency gripping and release applications, these single-stage vacuum generators are based on the Venturi principle and are equipped with a pneumatic ejector, which can be implemented on request through the M7 connection on the lid, to allow maximum speed in...
Special vacuum cups for the pharmaceutical sector
These vacuum cups have been designed and manufactured for the pharmaceutical sector.
They are used for handling syringes that are filled with liquid and capped during their transfer, making use of the internal passages on the special supports (not supplied) on which they are fitted.
...
New Vacupredator suction cups, ready to “bite”
Designed to facilitate robot integrators in one of the most difficult tasks in the field of handling in the packaging sector, they are perfect for picking up bags and flow packs, which are difficult to take by traditional rubber suction cups due to their flexibility.
The suction...
New digital vacuum and pressure switches with two-colour display
These new devices with two-colour display are enclosed within a robust ABS container. They are carefully calibrated and at compensated temperature, ensuring high-precision measurement values.
Detected values are viewed on the main two-colour (red and green) display and programmable by...
Single-stage and multi-function vacuum generators, MSVE series
The vacuum generators of this new series can fully drive a negative pressure gripping system.
By means of coaxial shutters, the original compressed air supply system feeds large quantities of air to both the ejectors and the ejection system, thereby ensuring faster gripping and...
New digital vacuum switches
These new digital vacuum switches made with ABS body are really compact and extremely light to allow for its installation on board automatisms and near use.
These carefully calibrated devices are able to provide very accurate measurement values. The detected values are shown on the...
Flat and bellow elliptical suction cups with relative supports
Vuototecnica offers you a complete range of flat elliptical suction cups, normally used for gripping, handling and clamping cardboard cases and boxes, wood shingles, small ceramic or brick tiles, iron or stainless steel profiles, sheets and anything else present on long, narrow gripping...
Bellow suction cups for flowpack packaging gripping
Created from experience, Vuototecnica welcomes the new increased performance bellows suction cups 01 30 45 S.
Especially suitable for installation on automatic, high production machines in the packaging sector, equipped with a grip lip designed to be extremely flexible, able to...
Two bellow suction cups for heavy-duty packaging
Vuototecnica has devised the all new two bellow suction cups for the handling of especially heavy cardboard boxes and packaging in the packaging sector.
These suction cups are able to compensate for the gripping height with a greater recovery of the unevenness of the load to be...
New rotary vane vacuum pumps, RVP series
Vuototecnica is proud to present a new range of rotary vane vacuum pumps, RVP.
It is an innovative product, which is technically complete in its standard equipment, built with the latest generation materials and at high standards of quality. It has a very high efficiency, and it is...
New solenoid valves for vacuums, for faster responses
A new, fully innovative series of solenoid valves for vacuums to guarantee exceptionally low response times have been created from Vuototecnica research and experience.
They are three-way vacuum solenoid valves, pilot-operated for capacities exceeding even 200 mc/h: They are used for...
Single-stage vacuum generators FVG 3 - 5 with ejector
• Specifically designed for high frequency grip/release applications
• Maximum supply pressure: 4 bar
• Available with the following capacities: 3 - 5 mc/h
• Maximum vacuum level: -85 KPa
• Excludable ejector
• Totally made of anodized aluminium
Octopus gripping bars now even lighter!
Anthropomorphic robots and palletising systems manufacturers require increasingly flexible vacuum gripping systems.
Vuototecnica meets this requirement of extreme lightness with the new OCTOPUS gripping bars made of polizene, a plastic material that reduces the overall weight by...
